Bx1 Single Level Water Switch Extra Small Size

• Customization: Available
• Type: Mechanical
• Number of Switch: Single Control Switch
• Structure: Power Built-in Type
• Usage: Control Switch
• Application: Home, Commercial, Industrial
• Explosion-proof Type: Non Explosion-proof
• Contact: Normally Open
• Contact Type: Type a Contact
• Detection Method: Reflection Type
• Brand: Ritor
• Certification: ISO9001, UL
• Electronical: 0.1A@24V DC or 0.1@250V AC
• Hose Connector: Ø 5.5 mm
• Electrical Connection: Flat Connector 6.3 or 4.8 mm
• Switch Type: Spdt
• Pressure Range: 0~-200mm H2O
• Repeatability: +/-1mm H2O
• Drift: +/-3mm H2O
• Transport Package: 1 Boxes
• Specification: 400*300*400
• Trademark: Ritor
• Origin: China
• HS Code: 8536500000

Product Description

Introduction:

Model BX1 is a kind extra small size single water level switch, it can perform as precises as 3mm water level of water. It used in water level control field, like the washing machine, dish washer or closestool. it ensures your machine uses the correct amount of water for each wash cycle.

This switch combined two seperated switches together, so it can detect 2 levels of water signal.


This Switch structured like B1 series as well, with a thin flexible diaphragm in the center of the housing(like a drumskin),
The diaphragm is separate the sensor housing into two chamber,  one is positive room, and another is negative room. The differential pressure of air will push the sealing part moving, the sealing part drive the switch on and off.
this switch can perform variable of water levels by adjusting a spring pressing oppositely against the diaphragm -





Technical Data:

Working Pressure Range	0 ~ 300mm H2O
Electronic Load	0.1A@250V AC, or 0.1A@24V DC
Working temperature	-20C ~ +65C
Duribility	100,000 Cycle
Terminal	187# & 250#
Drift	+/-3mm H2O
Switch Type	SPST-NO,SPDT
Certification	UL, CE

Dimensions:

Applications:
Aas water fills into the water tank, air pressure in the air-trap and therefore the switch, increases and the diaphragm distends outwards actuating against a switch which ultimately controls the water inlet valves or pump. 

when the water level falls below a preset level (the differential) a switch may open to enable the machine to stop.